Common Troubleshooting Techniques

Here are the five common techniques and strategies to solve common computer hardware problems.

Swap Components (Trial-and-Error)

Computers by design are highly modular.  The most effective way to troubleshoot your computer is  by isolating the problem with a specific parts by  trial and error. With this method you swap compatible components and see if the system works. Try other components or peripherals on different machines and see if the problem still occurs. Remember also to make one change at a time. This is a very effective method on locating a PC problem.

Check the cables

Nearly 80% of PC problems are associated with wires and contacts. You must ensure that just about all  cables are connected firmly. IDE and weak  bow wires and strength cables can often move  unfastened. Check if the microprocessor, memory space  modules, Movie plugs and also appear cards are usually  inserted correctly and also didn’t “pop-up” during  transportation.

Don’t get frustrated

Don’t get disappointed and don’t be afraid of the  personal computer problems consider it as the finest  opportunity to learn. For me personally trouble shooting is a  fun a part of using a computer. Just think with the  satisfaction, the knowledge and go through it  will provide you with after you solve the problem.

If you feel discouraged just leave it for a while,  take any minute rest then go back with your own fresh  ideas to solve the problem or perhaps if it’s too much in order to  handle seek help call someone who can easily help.

Note: You shouldn’t spend more than

three hours on the same problem at one time.

Take down notes

Taking down notes will certainly be very helpful. Take  notes of what you have done and also all the particular error  messages. Those notes may be valuable if you  encounter the particular same problem. For instance, when  you see an unusual blue screen with an error  message, copy the particular entire message onto a piece of  paper. Within many situations, which message may point  to the right direction in getting the problem  solved quickly.

Look inside

Don’t hesitate to open and look inside of your  computer. It’s OK to look inside your PC There is  only 5V as well as 12V DC voltage supplied to the  components outside the strength supply. But always  remember to be able to power down and also unplug the strength  chords before opening your pc.